How to implement Calibration: https://youtu.be/mYoAd_qF7Sw

https://youtu.be/mYoAd_qF7Sw

CL5200 Calibration Process

<aside> 💡

Check that the load cell rubber supports are not installed after removing the platter.

</aside>

• Turn off the scale
• Remove silver plate
• Holding down the switch with a pen

• Turn on the scale
• Scale is not win CALIBRATION MODE

• Install the plate

• Select 1 for CALIBRATION

• Select 1 for SPAN CALIBRATION

  

• Make sure there is nothing on the plate

• Press PRINT

• Put maximum weights 15kg

  

• Press PRINT once get stable weight of 15kg